LS-DYNA and RADIOSS Crash, Rollover and NVH Solver Correlation Study

LS-DYNA and RADIOSS Crash, Rollover and NVH Solver Correlation Study

Project Lead
Syed Nasir
Lead Consultant, Founder & CEO, Fluxiss
Discuss a similar project

The same crash, rollover, NVH and suspension cases run in LS-DYNA and RADIOSS to confirm solver equivalence and speed up design iteration.

Challenge

A vehicle safety programme had to validate crash, rollover and NVH targets on tight timelines that did not allow every load case to be run in both industry solvers.

Approach

Fluxiss ran identical front, rear and side crash, rollover, full-vehicle NVH and suspension kinematics cases in LS-DYNA and RADIOSS. Deformation, energy absorption, intrusion and kinematic parameters were compared at each timestep.

Result

The two solvers correlated closely on crash and rollover, suspension kinematics agreed within tolerance and NVH peaks aligned. The study identified the mesh and material card settings that gave the best correlation.

Scope of Work

  • Frontal, rear and side crash
  • Rollover and roof crush
  • Full-vehicle NVH
  • Suspension kinematics

Deliverables

  • Solver correlation report
  • Safety and performance report

Codes & Tools

FMVSS 208/214Euro NCAP protocolsLS-DYNARADIOSSHyperMeshHyperCrash
Our Computer Aided Engineering (CAE) service
Ready to Start Your Project?

Let's Build Something Great Together.

Partner with Fluxiss for engineering that holds up - under pressure, under load, under scrutiny.