- Providing Sustainable Engineering Solutions
- Get a Quote
- Info@fluxiss.com
An engineer hands over a “perfect” static model, only for the structure to rattle itself to pieces or buckle under a sudden gust. In our years of research into structural failures, we learned one thing: the world isn’t static. It’s moving, vibrating, and occasionally hitting things at high speed.
At Fluxiss, we don’t just look at how your design holds up under a steady load. We look at how it lives and breathes over time. Whether you’re building in the seismic zones of San Francisco, the windy corridors of London, or the high-heat environments of Dubai, you need to know how time and motion affect your assets. This is where Dynamic and Time-Dependent Analysis becomes your best friend.
We studied a bridge project where the team ignored the “natural hum” of the structure. They didn’t account for Natural Frequency Analysis, and the results were almost catastrophic. Every object has a frequency where it wants to vibrate. If your operating loads hit that “sweet spot,” you get resonance.
At Fluxiss, we perform deep-dive Modal Analysis to determine Natural Frequencies and Mode Shapes. We use Harmonic Vibration Analysis to see how your structure reacts to constant cycles (like a humming engine) and Random Vibration Analysis for the chaotic stuff—like wind or road noise.
Static analysis is like a photo; Transient Dynamic Analysis is the movie. We run simulations where a millisecond of difference in a Structural Impact Simulation changed everything. If you are designing for a “what if” scenario—like a car crash in New York or a dropped tool on an offshore rig in the North Sea—you need to see the play-by-play.
We specialize in Time History Analysis to track Dynamic Stress and Dynamic Deformation Analysis over a specific window. This isn’t just “hit and hope.” It’s a precise look at High Strain Rate Analysis—how materials actually behave when they are pushed to the limit in a fraction of a second.
This is the heavy-duty side of what we do. With the 2025 updates to ASCE 59-22 and the UK’s NPSA standards, the bar for Blast Analysis has never been higher. We spent months researching how an Explosion Simulation interacts with a building’s facade.
It’s not just the blast; it’s the air. Fluid-Structure Interaction (FSI) is the “gold standard” for realism. An FSI Simulation looks at how the fluid (air or water) and the structure (your building or pipe) affect each other simultaneously. If a blast wave hits a wall, the wall bends, which changes how the wave moves. We capture that loop with FSI Analysis.
We often get asked which “flavor” of Dynamic Finite Element Analysis is right. It depends on the speed.
We provide Dynamic FEA Simulation services that cross borders. From the skyscrapers of Chicago to the industrial hubs of Manchester and the infrastructure of Abu Dhabi, we help firms navigate Structural Dynamics Analysis with ease. We don’t just give you a colorful map of stresses; we give you a roadmap to a safer design.
Ready to see your design in motion?
Contact Our Experts at Fluxiss Today
Most engineers start with static loads, but that's only half the story. Static analysis assumes loads are constant, while Dynamic Load Analysis accounts for time-varying forces like wind, sea waves, or machinery. By understanding the Dynamic structural response, you can prevent fatigue and sudden failure.
Every structure has a "heartbeat." If your equipment matches this heartbeat, you get resonance. Our Natural Frequency Analysis identifies these dangerous zones so you can shift them during the design phase, ensuring Dynamic Stability Analysis and long-term reliability.
Regular FEA might miss how the fluid pushes back. FSI Simulation (Fluid-Structure Interaction) is essential for bridges, dams, and offshore rigs where the Vibration response simulation is driven by fluid flow. Use our FSI expertise to model complex environmental interactions accurately.
Threats aren't always predictable. Blast Load Analysis uses Explicit Dynamic Analysis to simulate pressure waves and fragments. We help you meet modern standards like ASCE 59-22 to ensure your building stays standing and occupants remain safe during an Explosion Simulation. Secure your high-risk assets with our specialized blast-resistant design services.
We’re proudly serving clients across the USA, UK, UAE, and Europe. From corporate giants to research labs and the shipping industry,