
96-Inch Cone-Cylinder Carbon Steel Pressure Vessel Analysis in PV Elite
ASME VIII Div.1 analysis of the 96 in OD SA-36 DF-3 vessel with cone-to-cylinder transitions, ASCE-7 wind and UBC seismic, MDMT 20°F.
Challenge
The DF-3 vessel is a large carbon steel vessel whose conical lower section transitions to a 96 in cylindrical body, designed for 100.01 psig internal and 0.25 psig external pressure.
Approach
The vessel was modelled element by element in PV Elite to ASME VIII Div.1, with ASCE-7 1993 wind (70 mph, Category C), UBC 1994 seismic, RT-1 radiography, static head and a horizontal hydrotest.
Result
A full PV Elite report was delivered, covering 19 load cases and an MDMT of 20°F.
Scope of Work
- Cone and cylinder element design
- Internal and external pressure
- Wind and seismic loads
- Hydrotest
Deliverables
- PV Elite calculation report
Similar projects

Low Grade Refining Column Design with 14 Bubble Cap Trays for Alcohol Distillation
EN 13445/ASME design of a 700 mm SS 304L alcohol refining column with 14 bubble cap trays, rated −1 to +3 bar g at 127°C.

Aluminium 6061 Trailer Structural FEA for Static, Dynamic, Braking and Turning Loads
ANSYS FEA of a 7×12 Al 6061 trailer across four load cases: all passed (minimum FOS 1.255), with critical joint and weld recommendations.

CFD Feasibility Study of a Grease Distribution Network for Bearing Lubrication
Transient ANSYS Fluent study showing a proposed grease network could not reach its four bearings, with redesign recommendations before fabrication.
Let's Build Something Great Together.
Partner with Fluxiss for engineering that holds up - under pressure, under load, under scrutiny.