
Composite Overwrapped Pressure Vessel FEA Across 12 Load Cases
ANSYS assessment of a carbon fibre COPV to ANSI/AIAA S-081B-2018 for proof, burst, vacuum and thermal cases, defining redesign before flight approval.
Challenge
A composite overwrapped pressure vessel (270 mm ID, 810 mm cylinder, Al-Mg-Sc liner) needed a structural assessment for proof, burst, external vacuum, temperature extremes and combined cases before flight certification.
Approach
Fluxiss built a layered ANSYS model with an 8.8 mm liner and 64 composite layers (28 helical at 30°, 36 hoop at 90°). Hashin fiber and matrix failure criteria were evaluated across 12 load cases (STR-1 to STR-12).
Result
The liner exceeded yield at proof pressure (386.73 MPa against 300 MPa) and at burst. The composite failed at proof (Hashin index 14.47), while external vacuum was safe with a buckling multiplier of 38.01. The report set out the redesign needed for liner thickness and composite schedule (Rev. 0, 23 March 2026).
Scope of Work
- Layered composite modelling
- Proof and burst pressure
- External vacuum buckling
- Thermal-pressure combinations
Deliverables
- FEA report with redesign requirements
Similar projects

FRP Wet Chlorine Line Material Upgrade and Integrity Assessment
Material selection, FEM thickness design and thermal analysis for upgrading a 100°C wet chlorine FRP line at Engro Polymer & Chemicals.

Blast Shelter Explicit Dynamics Analysis Under Detonation Loading
ANSYS Explicit Dynamics simulation of a 5 m blast shelter under detonation, identifying failure zones (minimum safety factor 0.339) for redesign.

Aluminium 6061 Trailer Structural FEA for Static, Dynamic, Braking and Turning Loads
ANSYS FEA of a 7×12 Al 6061 trailer across four load cases: all passed (minimum FOS 1.255), with critical joint and weld recommendations.
Let's Build Something Great Together.
Partner with Fluxiss for engineering that holds up - under pressure, under load, under scrutiny.