
Horizontal Lifeline Fall-Arrest Design for an Oil Terminal Loading and Decanting Gantry
Pakistan
CSA Z259.16 horizontal lifeline design for PSO's KTB loading gantry: 10 m span, 6 kN arrest force and 2.145 m fall clearance below lorry height.
Challenge
Pakistan State Oil (PSO) needed a certified flexible horizontal lifeline for operators on its KTB loading and decanting gantry, with fall clearance below the height of the tank lorry. Fluxiss carried out this work as engineering subcontractor.
Approach
The 10 m span, 10 mm rope system was calculated with the energy balance method to CSA Z259.16 and Singapore WSH requirements, using a 100 kg user, 2 m lanyard and 1.0 kN turnbuckle pretension.
Result
Maximum arrest force was 6.0 kN, cable tension at arrest 27.04 kN and total fall distance 1.193 m. Required clearance of 2.145 m was below lorry height, and the anchorage design load (MAL × 1.5) was 40.56 kN.
Scope of Work
- Cable sag and tension at arrest
- Fall clearance calculation
- Anchorage design load
Deliverables
- Calculation report 219-24-STR-CAL-001 Rev. 0
Codes & Tools
Similar projects

Cryogenic LNG Pipeline Stress Analysis and Support Redesign at −162°C
CAESAR II stress analysis of a 2-inch stainless LNG line at −162°C feeding flow meters and a cryogenic pump, rerouted and re-supported to pass ASME B31.3.

6-Inch Natural Gas Line Stress Analysis from Measuring Station to Gas Dryer
Existing-versus-modified CAESAR II analysis of a 6-inch carbon steel gas line with buried branches, bringing all stresses within ASME B31.3 allowables.

Seismic Pipe Stress and API-617 Compressor Nozzle Assessment for a Refinery Upgrading Project
Seismic and static analysis of a 6-inch refinery line where one added support brought compressor nozzle loads from fail to pass under API-617.
Let's Build Something Great Together.
Partner with Fluxiss for engineering that holds up - under pressure, under load, under scrutiny.