Oil & Gas projects.
Working mainly as engineering subcontractor, Fluxiss has delivered piping, pipeline, storage tank, pressure vessel and structural work for refineries, oil terminals, LNG and gas facilities. Projects include refinery and terminal work in Karachi, process skids in Italy and safety-critical fall arrest systems for loading gantries. Analyses follow ASME B31.3/B31.4/B31.8, BS EN 13480-3, API-650 and ASME VIII.
Fluxiss Oil & Gas work.
Every project below was led by Syed Nasir, Lead Consultant and Founder & CEO.

Cryogenic LNG Pipeline Stress Analysis and Support Redesign at −162°C
CAESAR II stress analysis of a 2-inch stainless LNG line at −162°C feeding flow meters and a cryogenic pump, rerouted and re-supported to pass ASME B31.3.

6-Inch Natural Gas Line Stress Analysis from Measuring Station to Gas Dryer
Existing-versus-modified CAESAR II analysis of a 6-inch carbon steel gas line with buried branches, bringing all stresses within ASME B31.3 allowables.

Seismic Pipe Stress and API-617 Compressor Nozzle Assessment for a Refinery Upgrading Project
Seismic and static analysis of a 6-inch refinery line where one added support brought compressor nozzle loads from fail to pass under API-617.

Buried and Above-Ground Oil Pipeline Stress and Surge Analysis from Tanker Berth to Terminal
Static and surge analysis of a 406 mm buried and above-ground oil pipeline from a tanker berth to a terminal, with all cases passing BS EN 13480-3.

PED-Compliant Diesel Injection Skid Pipe Stress and Skid Frame Design
Turnkey diesel injection skid for Sites SRL, Italy: pipe stress analysis, pump nozzle loads and skid frame design to PED 2014/68/EU.

High-Pressure CO2 Metering Skid Pipe Stress Analysis and Skid Design
CAESAR II stress analysis to ASME B31.3 and skid structural design for a high-pressure CO2 metering skid for Sites SRL, Italy.

Horizontal Lifeline Fall-Arrest Design for an Oil Terminal Loading and Decanting Gantry
CSA Z259.16 horizontal lifeline design for PSO's KTB loading gantry: 10 m span, 6 kN arrest force and 2.145 m fall clearance below lorry height.

Multi-User Horizontal Lifeline Design for a Tank Lorry Loading Facility
Single- and two-user horizontal lifeline analysis to CSA Z259.16 for a 16.8 m span over a tank lorry platform, with 80.3 kN governing anchorage load.

Retractable Fall Protection for Loading and Decanting Gantries at an Oil Terminal
Retractable fall protection with structural anchorage design and SWL certification for loading gantries at Total Parco's Keamari Terminal, Karachi.

Six-Tank API-650 Design Calculation Package for a Refinery at Korangi, Karachi
API-650 design of six utility and process tanks (45.6 to 1,160 m³) for National Refinery and OGDCL, for wind up to 160 mph and seismic zones 2A/2B.

API-650 Design of a 60 ft Hot Asphalt Storage Tank (3,362 m³)
Full API-650 calculations for an 18.3 m diameter asphalt tank at 150°C design temperature, SG 1.06, 100 mph wind and seismic zone 2B.

Foundation Design for a 60 ft, 3,673 KL Furnace Fuel Oil Tank at a Refinery
Pile/raft foundation design for a new 60 ft diameter, 3,673 KL FFO storage tank at Attock Refinery.

Refinery Steel Structure Design and Vetting: Gantry, Flare Stack Anchors and Waste Heat Recovery Boiler
Structural vetting and design at Pakistan Refinery Ltd. (PRL): JP-1 gantry, flare stack anchor bolts, a waste heat recovery boiler structure and more.
Let's Build Something Great Together.
Partner with Fluxiss for engineering that holds up - under pressure, under load, under scrutiny.