
Seismic Pipe Stress and API-617 Compressor Nozzle Assessment for a Refinery Upgrading Project
Seismic and static analysis of a 6-inch refinery line where one added support brought compressor nozzle loads from fail to pass under API-617.
Challenge
A 6-inch line on a refinery upgrading project needed seismic and static analysis, with nozzle loads checked at a centrifugal compressor. Without supports, sustained stress reached 96.4% of allowable and nozzle loads failed API-617 in all five load cases.
Approach
Two configurations were modelled in CAESAR II: the existing unsupported line and a proposed simple support 315 mm from the vertical pipe. Stresses, displacements and nozzle loads were compared for each.
Result
With the added support, sustained stress fell to 22.2% of allowable, expansion stress was 1.9% of allowable, and compressor nozzle loads passed API-617 for all load cases.
Scope of Work
- Static and seismic load cases
- Centrifugal compressor nozzle load check
- Support option comparison
Deliverables
- Stress analysis report (Doc. 316-1-MEC-RPT-002 Rev. A)
- Nozzle load comparison tables
Similar projects

Cryogenic LNG Pipeline Stress Analysis and Support Redesign at −162°C
CAESAR II stress analysis of a 2-inch stainless LNG line at −162°C feeding flow meters and a cryogenic pump, rerouted and re-supported to pass ASME B31.3.

6-Inch Natural Gas Line Stress Analysis from Measuring Station to Gas Dryer
Existing-versus-modified CAESAR II analysis of a 6-inch carbon steel gas line with buried branches, bringing all stresses within ASME B31.3 allowables.

Buried and Above-Ground Oil Pipeline Stress and Surge Analysis from Tanker Berth to Terminal
Static and surge analysis of a 406 mm buried and above-ground oil pipeline from a tanker berth to a terminal, with all cases passing BS EN 13480-3.
Let's Build Something Great Together.
Partner with Fluxiss for engineering that holds up - under pressure, under load, under scrutiny.